Home || Model SM-0 || Model SM-1 || Model SM-2 || Model SM-3 || Model VSM-2 ||    
 
Universal Gear Head Milling Machine
Model SM-2

Universal Gear Head Milling Machine
Model SM-3


Technical Specifications Model SM-2 SM-3
Surface of Table 1050 x 250 mm 1300 x 300 mm
Distance between T-slot 62 mm 80 mm
Longitudinal Travel of Table 600 mm 750 mm
Cross Travel of Table 230 mm 300 mm
Vertical Adjustment of Table 450 mm 550 mm
Distance between center line of 
spindle to lower surface of over arm
115 mm 170 mm
Taper in Spindle ISO 40 ISO 50
Quill - -
Head Swiveling to Both Side - -
Diameter of Milling arbor 25.4 25.4
Range of Spindle Speeds 40, 72, 100, 125, 225, 310, 385, 685, 960 RPM 40, 60, 80, 105, 140, 160, 210, 300, 330, 495, 660, 945 RPM
Number of Feeds 3 Feeds 3 Feeds
Motor 2 HP 1440 RPM 3 HP 1440 RPM
Floor Space 950 x 550 mm 1260 x 625 mm
Height 1670 mm 1900 mm

                             Extra Equipments : Electric Motor, Switch, Coolant Pump, V. Belts.

Dividing Head
with Gear Set
Rotary Table Milling Vices Slotting
Attachment
Rack Cutting
Attachment
 

Note : We reserve the right to deviate from the specifications given above as it is our constant endeavor to make improvements in the design of our products.